Description
The Webtrol Pro-Stainless Steel Series Centrifugals are designed for dependable performance and rugged continuous duty serivce. When you need a corrosion and erosion resistant pump, the Pro-Stainless Steel Centrifugal line of pumps is your logical choice. These pumps are guaranteed tough, engineered for the professional and built for lasting performance and value.
Features/Benefits
• Closed Coupled – Design saves space and simplifies maintenance and installtion
• Centerline Discharge – Ensures maximum resistance to misalignment and distortion caused by the piping connection
• Back Pullout – Design allows for maintenance of impeller and mechanical seal without removal of suction/discharge plumbing
• High Operating Efficiencies – Over a wide range of capacities which lower operating costs
• Mechanical Seals – and case o-rings are of high quality materials for standard pumping requirements. Optional high temperature and chemical resistant are available
Specifications
| Discharge | 1-1/2″ Flanged |
| Suction | 2-1/2″ Flanged |
| Impeller | 6-9/16“ |
| HP | 10 |
| Phase | 3 Phase |
| Voltage | 230/460 |
| Motor | ODP (Open, Drip Proof) |
| Length | 22.12″ |
| Max Operating Temp | 212° F |
| Frequency | 60 Hz |
| Speed | 3450 RPM |
Pump Curve
| PSI | 81.0 | 79.0 | 77.0 | 76.0 | 73.0 | 71.0 | 67.0 | 64.0 | 60.0 | 55.0 | 52.0 | 48.0 | 43.0 |
| GPM | 20 | 40 | 60 | 80 | 100 | 120 | 140 | 160 | 180 | 200 | 220 | 240 | 260 |
Curves are based on 60 Hz. 3450 rpm motors. These curves are for general guidance only, individua pump curves are available upon request.
Construction
| Wetted Materials | 304SS |
| Elastomers | EPDM |
| Motor Frame | Nema 56 |
| Shaft | 304SS |
| Mechanical Seal | Type 21 |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Single |
| Warranty | 1 Year |
Applications
• Pressure Boosting
• Ultrapure water systems
• Deionized systems
• Distribution Systems
•Car Wash
• Cooling towers
• Sprinkler and irrigation
• Parts Washer
• Poultry
• Beverage processing
• Water reclamation
• Jockey pump
• Liquid transfer
• Heat exchangers
• Pharmaceutical services
• Spray systems
• Scrubbers
• General pump applications
Specifications
| Discharge | 1-1/2″ Flanged |
| Suction | 2-1/2″ Flanged |
| Impeller | 6-9/16“ |
| HP | 10 |
| Phase | 3 Phase |
| Voltage | 230/460 |
| Motor | ODP (Open, Drip Proof) |
| Length | 22.12″ |
| Max Operating Temp | 212° F |
| Frequency | 60 Hz |
| Speed | 3450 RPM |
Pump Curve
| PSI | 81.0 | 79.0 | 77.0 | 76.0 | 73.0 | 71.0 | 67.0 | 64.0 | 60.0 | 55.0 | 52.0 | 48.0 | 43.0 |
| GPM | 20 | 40 | 60 | 80 | 100 | 120 | 140 | 160 | 180 | 200 | 220 | 240 | 260 |
Curves are based on 60 Hz. 3450 rpm motors. These curves are for general guidance only, individua pump curves are available upon request.
Construction
| Wetted Materials | 304SS |
| Elastomers | EPDM |
| Motor Frame | Nema 56 |
| Shaft | 304SS |
| Mechanical Seal | Type 21 |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Single |
| Warranty | 1 Year |
