Description
Maximum speed: 20,000 RPM
Pieces: 88
Includes
Aluminum Oxide Mounted Point, Red, Flame, 1/8″ dia. x 7/32″L, 3/32″ Shank
Aluminum Oxide Mounted Point, Red, Taper, 1/8″ dia. x 13/32″L, 3/32″ Shank
Red Rouge, 1″ Tube
6 Aluminum Oxide Sanding Bands, 1/4″ x 1/2″, 80 grit
6 Aluminum Oxide Sanding Bands, 1/4″ x 1/2″, 120 grit
6 Aluminum Oxide Sanding Bands, 1/4″ x 1/2″, 220 grit
6 Aluminum Oxide Sanding Bands, 1/2″ x 1/2″, 80 grit
6 Aluminum Oxide Sanding Bands, 1/2″ x 1/2″, 120 grit
6 Aluminum Oxide Sanding Bands, 1/2″ x 1/2″, 220 grit
Steel Cutter, Cylinder, 1/8″ dia. x 1/4″L with 1/8″ Shank
Steel Cutter, Cylinder, 5/16″ dia. x 3/8″L with 1/8″ Shank
Steel Cutter, Flame, 5/16″ dia. x 13/32″L with 1/8″ Shank
Steel Cutter, Triangle, 3/8″ dia. x 9/16″L with 1/8″ Shank
2 Rubber Bonded Abrasive Wheel, 7/8 x 1/8, 60 grit (brown)
2 Rubber Bonded Abrasive Wheel, 7/8 x 1/8, 180 grit (green)
2 Rubber Bonded Abrasive Wheel, 7/8 x 1/8, 120 grit (black)
Cotton Buff, 1″
CeramCut Blue Stone Point, Taper, 7/32″ dia. x 3/8″L with 1/8″ Shank, 120 Grit
CeramCut Blue Stone Point, Wheel, 1/2″ dia. x 1/8″T with 1/8″ Shank, 120 Grit
CeramCut Blue Stone Point, Wheel, 1/2″ dia. x 1/8″T thick with 1/8″ Shank, 120 Grit
CeramCut Blue Stone Point, Cyl., 1/8″ dia. x 1/4″L, 1/8″ Shank, 120 Grit
CeramCut Blue Stone Point, Tree, 3/8″ dia. x 3/4″L, 1/8″ Shank, 120 Grit
CeramCut Blue Stone Point, Flame, 1/8″ dia. x 5/16″L, 1/8″ Shank, 120 Grit
CeramCut Blue Stone Point, Pear, 3/8″ dia. x 1/2″L, 1/8″ Shank, 120 Grit
Cut Off Disc, Fiberglass, 1-1/4″
Felt Buff, Unmounted, 3/4″
Felt Buff, Unmounted, 5/8″
Grinding Stone, 3/4″
2 Mandrel, Screw, 3/32″ Shank and 1/16″ arbor hole
Mandrel, Screw, 1/8″ Shank and 1/16″ arbor hole
Mandrel, Screw, Large Head, 1/8″ Shank and 1/16″ arbor hole
Brush, Mounted, Cup, Bristle, 3/32″ Shank
Brush, Mounted, Wheel, Bristle, 1/8″ Shank
Brush, Mounted, Wheel, Bristle, 1/8″ Shank
Brush, Mounted, End, Brass, 3/32″ Shank
Brush, Mounted, End, Steel, 3/32″ Shank
Felt Bob, Mounted, Ball Nose, Medium Density, 1/8″ Shank
Felt Bob, Mounted, Cyl, Medium Density, 1/8″ Shank
Felt Bob, Mounted, Tree, Medium Density, 1/8″ Shank
Felt Bob, Mounted, Inv. Cone, Medium Density, 1/8″ Shank
Engraving Bur, Inverted Cone, .79mm, 3/32″ Shank
Engraving Bur, Inverted Cone, 2.35mm, 3/32″ Shank
Plated Diamond, Ball, 1.0mm dia. x 0.8mm L, 3/32″ Shank
Plated Diamond, Cyl, 4.0mm dia. x 8.0mm L, 3/32″ Shank
Plated Diamond, Taper, 2.6mm dia. x 7.0mm L, 3/32″ Shank
Engraving Bur, Ball, .79mm, 3/32″ Shank
Engraving Bur, Ball, 1.6mm, 3/32″ Shank
Engraving Bur, Ball, 2.35mm, 3/32″ Shank
Rubber Sanding Drum Mandrel, 1/4″ x 1/2″, 1/8″ Shank
Rubber Sanding Drum Mandrel, 1/2″ x 1/2″, 1/8″ Shank
Unmounted Felt Bob
V-Stone Point, Ball, 3/8″ dia., 3/32″ Shank, 46/60 Grit
V-Stone Point, Cyl, 1/4″ dia. x 1/2″ L, 3/32″ Shank, 46/60 Grit
