![3M 68898-32 O-Ring (AP801, AP801-C. AP802) [3 Pack]](https://www.industrialgeardepot.com/wp-content/uploads/2026/09/s103824418399842857_p220_i16_w1800.jpg)
Description
- Includes 3 replacement 68898-32 (also called 68898-31) o-rings to repair your leaking water filter housing
- Fits Housings: 3M AP801, 3M AP801-C, 3M AP802, (Not for the newer 3M AP801B/T or AP802B/T), KemFlo 5000 Series, KemFlo 10,000 Series, Keystone CG10/CG20.
- Replace your O-Ring with every 3rd filter change to prevent leaks
- O-Ring is approximately 5.6″ Inside Diameter x 0.215″ Thickness
- Molded from NSF 61 certified buna-n rubber for safe and clean drinking water. Manufactured and warrantied by Captain O-Ring LLC. Proudly assembled in the USA!
| Part Number | 68898-32 (also called 68898-31) |
| Filter Housing Compatibility | 3M AP801, 3M AP801-C, 3M AP802, (Not for the newer 3M AP801B/T or AP802B/T), KemFlo 5000 Series, KemFlo 10,000 Series, Keystone CG10/CG20 |
| O-Ring Inside Diameter | 5.6 inches |
| O-Ring Thickness | 0.215 inches |
| Material | Buna Nitrile Rubber |
| Grease/Lubricant Compatibility | No grease required. Simply wet the o-rings with water then install. Compatible with silicone and petroleum based greases if desired. |
| Contents (What To Expect) | Three (3) o-rings in Captain O-Ring branded packaging. |
Captain O-Ring’s replacement 68898-32 (also called 68898-31) o-rings are compatible with the following filter housings:
- 3M AP801
- 3M AP801-C
- 3M AP802
- (Does not fit the newer 3M AP801B/T or AP802B/T housings, see below)
- KemFlo 5000 Series
- KemFlo 10,000 Series
- Keystone CG10, CG20
Important Note 1: Does your filter housing use a square/flat gasket rather than a round o-ring?
Some of the older 3M AP801 models use a flat (squared-off) gasket rather than the round o-ring. These housings use the 68898-31 gasket rather than the newer 68898-32 o-ring. If you need the flat 68898-31 gasket, you can click here.
Important Note 2: Do you have one of the newer 3M AP801B, AP801T, AP802B, AP802T housings?
The newer 3M Aqua Pure AP801B/T and AP802B/T housings use the newer 3M 70-0203-5277-2 o-ring. It is slightly smaller in diameter than the older 3M 68898-32 o-ring. If you have one of the newer 3M AP801B, AP801T, AP802B, or AP802T filter housings, you can click here find your o-ring gasket.
