Description
Maximum speed: 20,000 RPM
Pieces: 35
Includes
Aluminum Oxide Mounted Point, Red, 120 grit, 3/32″ Shank
Aluminum Oxide Mounted Point, Red, Sphere, 3/32″ dia., 3/32″ Shank
Aluminum Oxide Mounted Point, Red, Cylinder, 5/64″ dia., 3/32″ Shank
Aluminum Oxide Mounted Point, Red, Cylinder, 1/4″ dia., 3/32″ Shank
Aluminum Oxide Mounted Point, Red, Flat Top Taper, 1/8″ dia., 3/32″ Shank
Aluminum Oxide Mounted Point, Red, Cone, 1/4″ dia., 3/32″ Shank
Aluminum Oxide Sanding Band, 1/4″ dia. x 1/2″ long, 60 Grit
Aluminum Oxide Sanding Band, 1/2″ dia. x 1/2″ long, 80 Grit
2 Rubber Bonded Abrasive, Wheel, 5/8″ dia. x 3/32″ thick, 1/16″ Arbor Hole, Medium
2 Rubber Bonded Abrasive, 7/8″ x 1/4″
Cotton Buff, Unmounted, 1″
Cut Off Disc, 7/8″, Rubber Bonded
Felt Buff, Unmounted, 3/4″
Felt Buff, Unmounted, 5/8″
Grinding Stone, 3/4″
Mandrel, 3/32″ Shank and 1/16 arbor hole
Brush, Mounted, Cup, Bristle, 3/32″ Shank
Brush, Mounted, Wheel, Bristle, 3/32″ Shank
Brush, Mounted, Wheel, Bristle, 1/8″ Shank
Brush, Mounted, End, Bristle, 3/32″ Shank
Brush, Mounted, End, Brass, 3/32″ Shank
Brush, Mounted, End, Steel, 3/32″ Shank
Brush, Mounted, Wheel, Steel, 3/32″ Shank
Felt Bob, Mounted, Ball Nose, Medium Density, 1/8″ Shank
Felt Bob, Mounted, Tree, Medium Density, 1/8″ Shank
Felt Bob, Mounted, Ball, Medium Density, 1/8″ Shank
Engraving Bur, Inverted Cone, .79mm, 3/32″ Shank
Engraving Bur, Inverted Cone, 2.35mm, 3/32″ Shank
Engraving Bur, Ball, .79mm, 3/32″ Shank
Engraving Bur, Ball, 1.6mm, 3/32″ Shank
Engraving Bur, Ball, 2.35mm, 3/32″ Shank
Rubber Sanding Drum Mandrel, 1/4″ dia. x 1/2″ long, 1/8″ Shank
Rubber Sanding Drum Mandrel, 1/2″ dia. x 1/2″ long, 1/8″ Shank
